VFTS Free Standing/Floor Mounted Overbraced Jib Crane (Eurosystem)
The VFTS Free Standing Overbraced Jib (Eurosystem) range of jib cranes are the most economical free standing units in our range. It is a free standing jib crane that is attached to a steel tube column and is completely independent from the building so it must be anchored to the ground, and you may need to install a foundation prior to installation for adequate testing to be carried out before it is put into use.
System capabilities:
- Load capacity 63kg to 2,000kg
- Radius/span 2m to 8m
- Height to underside of arm 2.5m to 4.0m
Technical Information
The VFTS Free Standing Overbraced Jib (Eurosystem) technical features:
- Overbraced configuration maximum slew 270 degrees
- Jib crane delivered ready for assembly
- Oversized base plate available to potentially alleviate the need for a foundation
- Can be mounted with resin anchors
- Eurosystem profile main beam
- Push trolley for hook suspension hoist
- Can be supplied with VR electric chain hoist
- Electrics to IP54 if required
- Power feeding inside profile if required
- Shot blasted structure prior to painting
- Polyurethane RAL1028 melon yellow painted finish
- Two year paint guarantee
- Frame structure to FEM 2m
- SWL plate and safety marking included as standard
Documents
Download VFTS Free Standing Overbraced Jib (Eurosystem) commercial and technical documents:
Related Products
Other products from our Jib Crane range:
Make an Enquiry
JIB CRANE CONSIDERATIONS
Although called a Jib Crane, it is actually a structure designed to support a manual or electric chain hoist. The type of jib crane or chain hoist you choose should be most suitable for your operation and the intended use, while a jib crane and chain hoist can be sourced from separate suppliers we recommend choosing a reputable vendor who can supply you with the full lifting solution to ensure you receive technically correct solution that is fit for purpose and a focus on safety.
UNDERBRACED, COLUMN MOUNTED JIB CRANE FOR AUTOMOTIVE MANUFACTURING OPERATION
Our customer required a lifting solution to operate within a low headroom environment that could assist in tool handling within their manufacturing operations.
The customer required a lifting solution to operate within an environment with limited space and particularly reduced headroom. In order to provide the customer with the span and lifting capacity they needed we designed and manufactured an underbraced Jib crane to fit into the facilities low headroom ceiling.
READ MORE